Full Website

Back

STORE LOCATIONS

Please choose a location to get contact information and driving directions:

Back

North Location Showroom

CDL Carpet & Floor Centre

11752 Sarcee Tr NW
Calgary, AB T3R0A1

Phone: (587) 332-6804

Store Hours:
MTWF 9 -6pm
Thurs 9 - 8pm
Sat 9 – 5
Sun closed

Driving Directions



Back

South Location Showroom

CDL Carpet & Floor Centre

7265 - 11th St SE
Calgary, AB T2H2S1

Phone: (587) 332-0161

Store Hours:
MTWF 9 -6pm
Thurs 9 - 8pm
Sat 9 – 5
Sun closed

Driving Directions



Back

Shop at Home

Just fill out the information below and we will contact you to schedule an appointment that's convenient for you






Back

Current Promotions

Back

Flooring Care Videos

Please choose a topic to learn more about how to maintain your floor.

Back

STAIN GUIDE

Please choose a topic to learn more about how to maintain your floor.


Back

Basics

Spills happen. Stains don't have to. Follow these general guidelines to prevent carpet blemishes whenever you have a mishap. Basic Cleaning Steps For All Food and Beverage Spills

1. Scoop up as much of the spill as possible, with a towel or a spoon.

2. Blot the spot, don't rub or scrub. Gently press clean cloths into the stained area to remove moisture.

Scrubbing can damage the fiber and set the stain into the carpet.

3. Apply warm, not hot, water to the stained area and blot until the stain stops transferring to the cloth.

4. If you can still see the stain, make a Detergent Solution by adding 1/4 teaspoon dishwashing liquid to one cup warm water. Don't use too much soap, because it's difficult to rinse out of the carpet.

5. Apply the detergent solution, let sit five minutes, then rinse with clear warm water. Repeat until all the detergent is removed.

6. Place layers of white paper towels on the spill to absorb the liquid. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

7. When the carpet is dry, vacuum to restore the texture.

8. If you can see the stain after all this, repeat steps 3 through

9. It means the stain penetrated deep into the pile and has wicked up to the surface.

Back

Acne Medication

1) Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2) Prepare suggested cleaning solutions below, beginning with the first one listed.

3) Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4) Apply the cleaning solution to the stain area. Note exception: Do not apply dry cleaning fluid directly to carpet. Apply first to cloth and use cloth to apply to carpet. Work from the outside of the stain toward the center.

5) Allow the cleaning solution to remain on the spill for at least five minutes.

6) Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7) Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8) If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9) If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10) Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11) When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Acne Medication
Dry Cleaning Fluid

Use non-flammable dry cleaning fluid or a liquid spot remover from the grocery store or hardware store. Detergent Solution

Mix 1/4 teaspoon mild liquid dish soap with one cup warm water.

Back

Bleach

Important to know: this product contains chemicals that may permanently alter the color of your carpet. You should follow the procedures below to make sure that all of the chemical is removed from your carpet to prevent further damage.

1) Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2) Prepare suggested cleaning solutions below, beginning with the first one listed.

3) Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4) Apply the cleaning solution to the stain area. Work from the outside of the stain toward the center.

5) Allow the cleaning solution to remain on the spill for at least five minutes.

6) Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7) Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8) If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9) If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10) Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11) When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Bleach
Detergent Solution

Mix 1/4 teaspoon mild liquid dish soap with one cup warm water.

Vinegar Solution Mix 2 tablespoons white vinegar with 4 cups warm water.

Back

Blood

1. Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2. Prepare suggested cleaning solutions below, beginning with the first one listed.

3. Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4. Apply the cleaning solution to the stain area. Work from the outside of the stain toward the center.

5. Allow the cleaning solution to remain on the spill for at least five minutes.

6. Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7. Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8. If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9. If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10. Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11. When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Blood
Detergent Solution

Mix 1/4 teaspoon mild liquid dish soap with one cup cold water.

Ammonia Solution Mix 2 tablespoons clear, white non-suds ammonia and 4 cups cold water.

Back

Candle Wax

1. Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2. Prepare suggested cleaning solutions below, beginning with the first one listed.

3. Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4. Apply the cleaning solution to the stain area. Note exception: Do not apply dry cleaning fluid directly to carpet.

Apply first to cloth and use cloth to apply to carpet. Work from the outside of the stain toward the center. 5. Allow the cleaning solution to remain on the spill for at least five minutes.

6. Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7. Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8. If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9. If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10. Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11. When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Candle Wax
Dry Cleaning Fluid

Use non-flammable dry cleaning fluid or a liquid spot remover from the grocery store or hardware store.

Detergent Solution

Mix 1/4 teaspoon mild liquid dish soap with one cup warm water.

Back

Grease

1. Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2. Prepare suggested cleaning solutions below, beginning with the first one listed.

3. Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4. Apply the cleaning solution to the stain area. Note exception: Do not apply dry cleaning fluid directly to carpet.

Apply first to cloth and use cloth to apply to carpet. Work from the outside of the stain toward the center. 5. Allow the cleaning solution to remain on the spill for at least five minutes.

6. Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7. Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8. If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9. If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10. Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11. When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Grease

Dry Cleaning Fluid
Use non-flammable dry cleaning fluid or a liquid spot remover from the grocery store or hardware store.

Detergent Solution
Mix 1/4 teaspoon mild liquid dish soap with one cup warm water

Back

Makeup

1. Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2. Prepare suggested cleaning solutions below, beginning with the first one listed.

3. Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4. Apply the cleaning solution to the stain area. Note exception: Do not apply dry cleaning fluid directly to carpet.

Apply first to cloth and use cloth to apply to carpet. Work from the outside of the stain toward the center. 5. Allow the cleaning solution to remain on the spill for at least five minutes.

6. Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7. Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8. If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9. If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10. Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11. When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Makeup

Dry Cleaning Fluid
Use non-flammable dry cleaning fluid or a liquid spot remover from the grocery store or hardware store.

Detergent Solution
Mix 1/4 teaspoon mild liquid dish soap with one cup warm water.

Back

Nail Polish Stain

1. Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2. Prepare suggested cleaning solutions below, beginning with the first one listed.

3. Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4. Apply the cleaning solution to the stain area. Work from the outside of the stain toward the center.

5. Allow the cleaning solution to remain on the spill for at least five minutes.

6. Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7. Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8. If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9. If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10. Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11. When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions Nail Polish
Non-acetone Nail Polish Remover

Back

Paint Latex

1. Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2. Prepare suggested cleaning solutions below, beginning with the first one listed.

3. Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4. Apply the cleaning solution to the stain area. Note exception: Do not apply dry cleaning fluid directly to carpet.

Apply first to cloth and use cloth to apply to carpet. Work from the outside of the stain toward the center. 5. Allow the cleaning solution to remain on the spill for at least five minutes.

6. Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7. Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8. If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9. If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10. Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11. When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Paint

Dry Cleaning Fluid
Use non-flammable dry cleaning fluid or a liquid spot remover from the grocery store or hardware store.

Detergent Solution
Mix 1/4 teaspoon mild liquid dish soap with one cup warm water.

Back

Urine

1. Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2. Prepare suggested cleaning solutions below, beginning with the first one listed.

3. Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4. Apply the cleaning solution to the stain area. Work from the outside of the stain toward the center.

5. Allow the cleaning solution to remain on the spill for at least five minutes.

6. Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7. Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8. If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9. If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10. Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11. When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Urine

Detergent Solution
Mix 1/4 teaspoon mild liquid dish soap with one cup warm water.

Vinegar Solution
Mix 2 tablespoons white vinegar with 4 cups warm water

Back

Wine

1. Scoop up and blot as much of the spill as possible. Vacuum up any dry particles.

2. Prepare suggested cleaning solutions below, beginning with the first one listed.

3. Pretest the cleaning solution on an inconspicuous spot of carpet to ensure it does not discolor or damage the carpet.

4. Apply the cleaning solution to the stain area. Work from the outside of the stain toward the center.

5. Allow the cleaning solution to remain on the spill for at least five minutes.

6. Blot with a clean white cloth until no more stain transfers to the cloth. Do not rub the stain area or you might damage the carpet fibers.

7. Rinse with cold water. Be sure all cleaning solution is removed from carpet.

8. If you can still see the stain, repeat the process until either the stain is removed or the stain no longer transfers to the cloth.

9. If the stain remains, try the next solution on the list and follow the same protocol above. If the stain persists after trying each solution listed, contact a professional cleaner.

10. Once the stain is removed, place layers of white paper towel on the site to absorb any moisture. Weight down the towels with a non-staining glass or ceramic object. You can let them sit overnight.

11. When the carpet is dry, vacuum to restore the texture.

Cleaning Solutions for Wine

Detergent Solution
Mix 1/4 teaspoon mild liquid dish soap with one cup warm water.

Vinegar Solution
Mix 2 tablespoons white vinegar with 4 cups warm water.

Back

About us

We have been around for 20 years, we have two locations to serve Calgary and surrounding area, (north and south locations).  Family owned business.  We carry most major flooring brands, and specialty products, also lots of instock carpet / vinyl / hardwood / cork / laminate / lvt and area rugs.

Back

Thank You

Thank you for your interest in our products and services. You will be contacted by one of our sales representatives within 2 working days.

Please use the back button on top-left corner to return to the homepage

.

Back

Get Connected